When a concrete floor or asphalt surface needs a straight, controlled cut, the details matter. Titan provides professional slab sawing for construction, renovation, utility and removal work across Toronto, Mississauga and the GTA.
Slab sawing, also called floor sawing or flat sawing, is used to cut horizontal surfaces such as concrete floors, suspended slabs, pavement and asphalt. A walk-behind saw follows the marked cut line to create a cleaner and more predictable edge than breaking the material first.
It is a practical choice when a project requires a defined opening, trench or removal boundary. Depending on the scope, slab sawing may also make the next stage easier by dividing concrete into sections that can be removed in a controlled way.
Titan supports construction, renovation, repair and removal work. The cutting setup is selected around the material, required depth and actual conditions on site.
Cuts for plumbing, drainage, electrical conduit and other below-floor services.
Defined openings for stairways, elevators, pits and new building installations.
Clean boundaries before damaged or unwanted concrete sections are broken out.
Warehouse, industrial and commercial slab modifications for changing operations.
Cuts for road, driveway, parking-area and exterior pavement repair work.
Expansion and control-joint cutting based on the approved project layout.
Indoor access, ventilation, slab thickness, reinforcing steel, water management and the area below the slab can all affect the work plan. Titan reviews those details before the crew arrives.
Cuts follow the approved layout and project requirements for a defined, predictable edge.
The cutting method is selected around the material, access, ventilation and required depth.
Sawing before removal can reduce unwanted chipping into concrete that needs to remain.
Ask Titan to coordinate slab cutting with concrete breaking, handling and removal.
A little project information upfront helps us plan a safer, cleaner and more useful visit.
Send the site address, photos or drawings, approximate dimensions, slab thickness if known, and the purpose of the cut.
We review access, indoor or outdoor conditions, ventilation, water and slurry considerations, and what is beside or below the cut.
Cut lines and depths are checked against the approved project information. Scanning or locating may be recommended.
Our crew sets up the work area and performs the slab cuts using the method selected for the job.
We confirm the cleanup, concrete breaking and debris-removal items included in the written scope.
Toronto and Mississauga projects often come with tight access, active work areas and short construction windows. One job may be inside a basement or occupied commercial unit; the next could involve a warehouse slab, parking structure or exterior pavement.
Titan plans the work around the actual site rather than treating every slab as the same. Let us know about loading restrictions, elevators, occupied areas, working-hour limits or other constraints when requesting your estimate.
Titan serves Toronto, Mississauga, Etobicoke, North York, Scarborough, Vaughan, Markham, Richmond Hill, Brampton, Oakville and surrounding GTA communities. Contact us with your project address to confirm availability.
These are the details project teams usually want to settle before a slab cut is scheduled. If your situation is different, send us the drawings or a few clear photos.
The terms are commonly used for the same process: cutting horizontal concrete or asphalt with a walk-behind saw. “Floor sawing” is often used for indoor slabs, while “slab sawing” can describe both indoor and outdoor work.
Yes, although the equipment and work plan need to suit the space. Access, ventilation, noise, water, slurry and nearby occupants should be discussed before the work is scheduled.
Diamond slab saws can cut reinforced concrete. The amount and location of reinforcing steel, along with the required cut depth, can affect production and equipment selection.
Scanning or locating may be recommended when the slab could contain electrical conduit, plumbing, post-tension cables or other concealed items. The correct pre-cut review depends on the structure and scope.
Send the site address, photos or drawings, total length of cuts, required depth or slab thickness if known, indoor or outdoor location, access notes, and whether concrete removal is required.
Need concrete floor cutting for a renovation, utility trench, repair or removal project? Tell Titan where the work is located and what the finished opening or cut needs to accomplish.
Controlled removal of cut or unwanted concrete sections.
Surface preparation, high-spot reduction and coating removal.
Clean circular openings for plumbing, electrical and HVAC work.
