Creating an opening in a concrete wall calls for more control than ordinary demolition can provide. Titan offers professional wall sawing for doorways, windows, mechanical openings and structural modifications across Toronto, Mississauga and the GTA.
Wall sawing uses a diamond blade mounted on a guided track. The track keeps the saw aligned while the blade advances through the wall, allowing accurate cuts on vertical surfaces, steep angles and other locations where a floor saw cannot work.
It is commonly used on reinforced concrete foundations and walls. Depending on the project, wall sawing may be combined with core drilling, hand sawing, wire sawing or concrete removal to complete the opening safely.
Titan supports new openings, renovations and selective wall removal. The approved layout, structural requirements and concealed hazards should be resolved before the saw is mounted.
New passage and doorway openings in concrete and masonry walls.
Basement, foundation and building window openings cut to the approved layout.
Openings for ventilation, ductwork and other mechanical services.
Wall penetrations for conduit, piping and building-service installations.
Larger access and loading openings for equipment or operational changes.
Defined cuts for controlled removal of concrete wall sections.
Track-guided wall sawing creates more defined openings with less impact on the surrounding wall than uncontrolled breaking. Setup, support and removal still need to be planned carefully.
The guided track follows the marked layout to create clean edges for framing and finishing.
Diamond wall saws can cut concrete containing reinforcing steel.
Sawing cuts the wall instead of relying entirely on impact demolition.
Track systems can work on vertical or sloped surfaces where floor saws cannot.
The cutting itself is one part of the assignment. Layout, access, support and removal all need to line up.
Send the site address, drawings, opening dimensions, wall thickness, photos and known reinforcement details.
Titan reviews equipment setup, water, access, occupied areas and the route for removing concrete sections.
The opening is laid out from information supplied by the responsible contractor, owner or engineer. Scanning may be recommended.
The track is mounted and the wall is cut in the planned sequence using diamond-blade equipment.
The wall section is supported, divided if necessary and removed according to the agreed scope.
Titan works with the practical realities of GTA sites: finished basements, condominium rules, occupied commercial spaces, loading restrictions and industrial shutdown windows.
Getting equipment in, protecting nearby finishes and safely moving the cut concrete out are part of the plan as well. Share those constraints at the estimate stage.
Titan provides concrete wall sawing in Toronto, Mississauga, Etobicoke, North York, Scarborough, Vaughan, Markham, Richmond Hill, Brampton, Oakville and surrounding GTA communities. Contact us with your project address.
Opening dimensions, structural requirements, concealed services and section handling should all be confirmed before wall sawing begins.
Yes, wall sawing is commonly used for openings in concrete foundation walls. Structural review, permits, drainage, lintels or framing may also be required depending on the project.
Yes. Diamond wall saws can cut reinforced concrete. Heavy reinforcement and embedded steel can affect time, equipment and the cutting sequence.
Wall sawing is designed for controlled, low-impact cutting. The surrounding structure still needs to be assessed, and the cut section must be supported so it does not break away unexpectedly.
Scanning is often advisable when electrical conduit, plumbing, post-tension components or other concealed hazards may be present. The project team should also confirm structural reinforcement and obtain engineering direction where required.
Provide the site address, photos of both sides if available, opening width and height, wall thickness, wall material, access conditions, drawings, and whether removal of the cut concrete is required.
Planning a new doorway, window, vent or service opening? Send Titan the drawings, dimensions and site photos for a wall sawing estimate.
Cutting for thick, heavily reinforced or unusually shaped concrete.
Straight cuts through horizontal floors, slabs and asphalt.
Controlled removal of concrete cut from the wall opening.
